Tunnel Nano Fluorosilicon Energy Storage Luminescent Coating Tunnel Nano Coating

Construction sequence and method of fluoro-silicon nano waterproof coating: The construction sequence should first address nodes and additional layers, followed by large-area brushing; Sealing of panel joints: After cleaning the joint grooves, fill them with sealing materials; Joint surface reinforcement: After sealing the panel joints (the product must be completely dry), an additional loose-laid layer should be applied; Overall coating application: First, apply a primer by coating the entire roof surface once, and after drying, apply this product in layers and multiple passes.

When reinforcing mesh fabric or other reinforcement materials can be embedded in the fluoro-silicon nano waterproof coating layer, it is advisable to apply and lay simultaneously; The reinforcement material should be smoothed out to eliminate bubbles and ensure saturation with the coating; The top layer coating over the reinforcement material should be applied in no less than two passes, with a thickness not less than 1mm; When using two layers of reinforcement material, the upper and lower layers should not be laid perpendicular to each other. Fluoro-silicon nano waterproof coating: Suitable for waterproofing and corrosion protection in subways, water channels, swimming pools, irregular concrete, and wooden structures. It can be used for both new waterproof and anti-corrosion layers and for repairing damaged waterproof and anti-corrosion layers. It is applicable for waterproofing and corrosion protection in conventional areas as well as in areas like deformation joints, offering advantages over other materials in regional waterproofing and corrosion protection.

Due to its sealing capability, fluoro-silicon nano waterproof coating can repair damaged sections of the waterproof and anti-corrosion layer. The surrounding areas of the damaged part are filled into the affected area, blocking water leakage and seepage between the waterproof and anti-corrosion layer and the concrete base surface. It is used for sealing cracks, expansion joints, construction joints, and structural joints in buildings and underground concrete engineering.